| |
|
|
|
|
|
스핀코터(Spincoater)
마스크얼라이너(Mask
Aligner) |
|
|
|
| |
|
| |
|
|
|
|
|
|
|
| TRANSFERS & SORTERS WAFER ALIGNERS VACUUM WANDS WAFER PICKS METAL CASSETTES MASK PICKS OPENERS PRESENTERS TRANSPORT BAGS MOCK WAFERS |
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
Transfers |
|
|
|
| |
Sorters
SafeGuard Thin/Compound
Automatic Slide Transfer
Manual Slide Transfer |
|
WHS-T3
MANUAL SLIDE TRANSFER
Wafer Size:3" 4" 6" 8" |
|
|
|
|
-Type:Manual
-25 slot
|
| |
|
Automatic Notch Aligner
Automatic-flat-aligner
Manual-notch-aligner
Manual-flat-aligner |
Antistatic Construction With Wafer and Cassette Ground Paths
Maintenance-Free Precision Slide Rails
Chemical Resistant Materials |
| |
|
Portable Wand
Vacuum Wand Set
Vacuum tips
Vacuum Handles |
|
 |
 |
 |
 |
|
| |
|
|
Wafer 3-point mechanical gripper
Wafer Edge Pick |
-Shipping/receiving area:?Wafer transfers are used to move incoming wafers from a shipping cassette to a WIP production cassette. |
-Epitaxial area: Wafer transfers are used to move incoming wafers from a shipping cassette to a WIP production or specialty EPI process cassette |
| |
|
|
Aluminum Process Cassettes
Aluminum Box Cassettes
Stainless Steel Process Cassettes
Process Cassettes 300mm |
Wet chemistry areas: Wafer transfers are used to move wafers between a WIP production cassette to a wet process Teflon PFA cassette when they enter wet chemistry areas. |
Thermal process bake areas: Wafer transfers are used to move wafers between a WIP production cassette and metal or quartz cassettes when they enter thermal process bake process areas |
| |
|
|
Mask Pick - Side Grip
Mask Pick - Horizontal Grip |
Probe and test areas: Wafer transfers are used to move incoming wafers from a shipping cassette to a WIP production cassette. |
Metrology and inspection areas: Wafer transfers may also occur in metrology and inspection areas where wafers are analyzed and inspected for defects and other quality control measures. |
| |
|
|
Manual Reticle SMIF Pod Opener, RSP150
Manual FOUP Opener, 300 mm |
Wafer Flipping/Inverting: Wafer transfers are used to move wafers from one cassette to another that has been inverted 180°. In semiconductor manufacturing, there are various processes that involve working on the backside of a wafer. These processes can include backside lithography, etching, deposition, and bonding, among others. To carry out these processes, the manufacturer needs to flip the wafer over so that the backside is facing up. |
The T3 series is a precision manual horizontal bulk wafer slide transfer for safely transferring wafers between two SEMI compliant wafer cassettes. Compatible with high-and low-profile plastic process, metal cassettes and most shipping cassettes with an H-BAR. Features a smooth, service-free slide rail system engineered with advanced coated rods paired with UHMW bearing blocks. Antistatic, abrasion and chemical resistant materials. ISO Class 4. |
| |
|
|
Automatic Wafer Presenter
Manual Five-Wafer Lift Presenter
Manual Single Wafer Presenter
21-manual-wafer-escalators |
|
|
|
|
| |
재성ITS co.
경기도
안양시 동안구 호계 555-9 안양
국제 유통단지 17동 127호
Tel
: (031) 479-4211/2, Fax : (0504) 460-0288
1992-2023
,Jsi.co. All rights reserved
Contact us :contrabase26@gmail.com jsi@jsits.com |
| |
|
|
|
|
|
|
|
