Following tools are included in the JS-650 Super Tough Gray kit JTK-87 tool

Feeler gauge (.038mm-.635mm)
Hex blades (7): 1.27mm-5mm)
Mini-nutdrivers (2): 3mm, 3.5mm
Nutdriver blades (10): 4mm-11mm
Pin punches (3): 1mm-3mm
Rule, 15cm
Wire crimper/stripper
Alignment tools (2)
Burnisher (pkg./3)
DlP/lC extractor*
Feeler gauge
File kit, 3 pc.
Hammer, ball peen, 4 oz.
Handle, driver blades, (2) 4-1/8", "T"
Handle,File
Hemostat, straight, 5" *
Hexdriver blades (9): .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16"
Hex key set, 10 pc.
Hex key fold up (7), 2-8mm
Knife precision
Knife blades
Mirror, inspection
Nutdriver blades (9): 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"
Outlet tester
Parts box
Penlight
Pliers (7): diag. cutter 4-1/4"; diag. cutter 5-1/4"; groove joint 7"; groove joint 10"; long nose 4-3/4"; long nose with cutter 6-3/4"; retaining ring, external
Pliers, Locking, 5"
Punch, center, 3/32"
Punch, pin (2) 1/16, 1/8"
Rule, stainless, 6"
Scissors, electrician's
Screwdrivers (12): Phillips offset ratchet, No.0 x3" pocket clip, No.1 x 3", No.2 stubby, No.2 x 4"; slotted offset ratchet, pocket clip, 1/8 x 3", 1/8 x 8", 3/16 x 3", 1/4" stubby, 1/4 x 4",5/16 x 6"
Screwdriver set, jeweler's, 7 pc.
Screwstarters (2): Phillips magnetic; slotted magnetic
Scriber
Solder removal tool
Soldering iron**
Spring tool combination
Tape measure, 12'
Trimpot tool
Tweezer, reverse action
Wire crimper/stripper
Wire stripper/cutter
Wrench, adjustable, 6"
Tool case with pallets

including can be variable without notice