Provides the rapid determination of the moisture content in wood
in surveying buildings for dampness, water or fire damage; the
manufacture, installation and repair of wood furniture and flooring;
and for all lumber and timber inspection. Internal calibrations
are resident for 150 different species of wood. Fast response
time. Features max-min, hold, automatic power shut-off, and self-calibration
functions. An RS 232 port enables computer interface. Covers a
range of 9 ~30% in 0.1% resolution and with an accuracy of 4%
+ 5d (at 23C +/-º5C). Comes ready to use with probe with a 41"
cable and cover, spare contact pins, a hard shell carrying case,
battery and instructions.
||7" x 3" x1 ¼" (188x76x32mm
||12 oz. (340 gr.).
||13mm(0.5") large LCD display
||9% to 30%moisture content
||0.1% moisture content
|± (4% + 5d)
*Above fiber saturation (25% to 30%) readings are approximate value-for reference only.
* Specification tested under the environment RF Field Strength less than 3 V/M &
frequency less than the 30 MHz only
||2 pin moisture electrodes/Dimension-0.9"(23mm) x
||Manual temperature compensation of the meter in the range of 0 to
||Built in self calibration circuit
||Approximately 0.8 seconds
||RS232 PC serial output (Cable not included)
||Less than 90%R.H.
||DC 9V battery
||Approximately DC 5.8 mA
||One 9V battery
||Hard Carrying Case, battery, 10 extra pins, Instruction manual
Optional Accessories: (click links for product details)
Send comments to: firstname.lastname@example.org