MAIN MENU

CATALOG INDEX
BY ALPHABETICAL
ORDER


For more info:
JSi@jsits.com

경기도 안양시
동안구 호계동 555-9
안양 국제 유통단지
17동 127호

Tel :
(031) 479-4211/2,

Fax :
(031) 479-4213


1992-2012 ,Jsi.co.
All rights reserved.

 
Product Category: Conductivity
Conductivity Junction Box

400
Conductivity Junction Box

For Reliable Measurement

  • Minimizes moisture and interference problems
  • Provides field disconnect point for conductivity sensor
  • Mounts on top of conductivity sensor or on support pipe via 3/4 inch FNPT.

Benefits

  • Reduces electrical interference problems
  • Normally supplied in weatherproof/explosion proof UL and CSA approved junction box
  • Wiring and hook-up instructions for analyzer specified are included

The illustration shows the 400 junction box with a model 401 sensor.

Model Number Model Name Quantity
400 Model 400 Conductivity Junction Box  


0 IC Controls 450, 452, 453 ½ DIN, 453-9, 455, 456; Specify analyzer model number in brackets
71 Surface mount J-Box, NEMA 4X corrosion-resistant plastic (not explosion proof)
72 Cable, J-box to analyzer
89 Stainless steel tag

 


  
Hot Condensate Conductivity Sensor

401
Hot Condensate Conductivity Sensor

Model 401: Hot Condensate Conductivity Sensor

For Reliable Conductivity Measurement
  • Return condensates (0 to 100 microsiemens/cm)
  • Hot aqueous samples
  • Tough environment problems
Benefits
  • Rugged industrial conductivity sensor
  • Low maintenance
  • Easy to calibrate
  • Rapid and accurate response
  • Weatherproof/explosion proof
  • Automatically temperature compensated
  • High operating temperature and pressure
  • IC CONTROLS factory-certified calibration
  • Constructed of 316 SS and PEEK
  • Direct insertion, ¾" NPT screw-in design, or install into a ¾" NPT tee. 1.0/cm and 2.0/cm constants require a 1" to ¾" bushing and a 1" NPT tee.
  • Submersion mountable, using ¾" FNPT on inside of a 1" pipe and a long sensor lead
  • Model Number Model Name Quantity
    401 Model 401 Hot Condensate Conductivity Sensor  


    0.1 0.1/cm sensor constant, 10 μS/cm to 1,000 μS/cm
    0.2 0.2/cm sensor constant, 20 μS/cm to 2,000 μS/cm
    1 1.0/cm sensor constant, 100 μS/cm to 10,000 μS/cm
    2 2.0/cm sensor constant, 200 μS/cm to 20,000 μS/cm
    62 High temperature, maximum 200ºC (392ºF), require over 150ºC (302ºF)
    71 Long sensor cable, maximum 30 m (100 ft), 100 ºC (212 ºF) max, requires option -77.
    72 Cable, 400 J-box to analyzer
    73 Stainless steel flow cell, 1/8 inch NPT, 70 mL volume
    77 Basic replacement cell (no juction box & terminals)
    89 Stainless steel tag
    90 100 μS/cm standard, 500 mL bottle
    97 Conductivity calibration kit for cell constants 0.1/cm to 5.0/cm

 
High-Purity Conductivity Sensor

402
High-Purity Conductivity Sensor

Model 402: High-Purity Conductivity Sensor

For Reliable Conductivity Measurement
  • High purity water (10 microsiemens/cm to below 1 microsiemens/cm)
  • Hot pressurized samples
  • 0 to 1 and 0 to 2 microsiemens/cm ranges
Benefits
  • Rugged industrial conductivity sensor
  • Low maintenance
  • Easy to calibrate
  • Rapid and accurate response
  • Weatherproof / explosion proof
  • High operating temperature and pressure, with automatic temperature compensation
  • IC Controls factory-certified calibration
  • Construction of 316 SS and PEEK
  • Use in a sample flow system with a SS flow cell. (Picture has 1/8" NPT inlet and outlet ports.)
  • Direct insertion, ¾" NPT screw-in design.
  • Submersion mountable by reversing
    ¾“ NPT fitting and installing into
    ¾“ FNPT on inside of a 1" pipe
    (requires long sensor leads).
Model Number Model Name Quantity
402 Model 402 High-Purity Conductivity Sensor  


0.01 0.01/cm sensor constant, 0 μS/cm to 100 μS/cm
0.02 0.02/cm sensor constant, 0 μS/cm to 200 μS/cm
71 Long sensor cable, maximum 30 m (100 ft), 100 ºC (212 ºF) max, requires option -79.
72 Conductivity 400 J-box to analyzer cable
73 Stainless steel flow cell, 1/8 inch NPT, 70 mL volume
77 Basic replacement cell with ferrules and O-ring, no juction box or terminals.
79 Basic sensor, no juction box, no mounting fitting. Requires option -71.
89 Stainless steel tag
90 100 μS/cm standard, 500 mL bottle
97 Conductivity calibration kit for cell constants 0.1/cm to 2.0/cm

 
Ball Valve Conductivity Sensor

403
Ball Valve Conductivity Sensor

Model 403: Ball Valve Conductivity Sensor

For Reliable Conductivity Measurement
  • Return condensate
  • Hot and/or pressurized aqueous samples
  • Tough environment problems
  • Applications where pressure cannot be reduced to zero for electrode removal
Benefits
  • Ball valve retractable
  • Rugged industrial conductivity sensor
  • Low maintenance
  • Easy to calibrate
  • Rapid and accurate response
  • Weatherproof/explosion proof
  • Automatically temperature compensated
  • High operating temperature and pressure
  • IC CONTROLS factory-certified calibration
  • Construction 316 SS and PEEK
  • Can be used in a sample flow system with a stainless steel flow cell

Model Number Model Name Quantity
403 Model 403 Ball Valve Conductivity Sensor  


0.01 0.01/cm sensor constant, 0 μS/cm to 100 μS/cm
0.02 0.02/cm sensor constant, 0 μS/cm to 200 μS/cm
0.1 0.1/cm sensor constant, 10 μS/cm to 1,000 μS/cm
0.2 0.2/cm sensor constant, 20 μS/cm to 2,000 μS/cm
1 1.0/cm sensor constant, 100 μS/cm to 10,000 μS/cm
2 2.0/cm sensor constant, 200 μS/cm to 20,000 μS/cm
5 5.0/cm sensor constant, 500 μS/cm to 50,000 μS/cm
19 Extra long body for thick walls, specify body length, priced per inch for lengths over 43 cm (17 inch)
21 Retraction ball valve, max. pressure 689 kPa (100 psi), fittings, safety lanyards
22 Integral mounted explosion proof UL & CSA J-box and terminal strip
71 Long sensor cable, maximum 30 m (100 ft), 100 ºC (212 ºF) max.
72 Conductivity 400 J-box to analyzer cable
74 Stainless steel insertion gland fitting, ¾ inch MNPT
89 Stainless steel tag
90 100 μS/cm standard, 500 mL bottle
91 1,000 μS/cm standard, 500 mL bottle
92 10,000 μS/cm standard, 500 mL bottle
93 100,000 μS/cm standard, 500 mL bottle
97 Conductivity calibration kit for cell constants 0.1/cm to 5.0/cm

 
General Purpose Conductivity Sensor

404
General Purpose Conductivity Sensor

Model 404: General Purpose Conductivity Sensor

For Reliable Conductivity Measurement
  • Medium conductivity applications
  • Corrosive and chemical problems
  • Process liquids
Benefits
  • Universal industrial conductivity sensor
  • Low maintenance
  • Easy to calibrate
  • Rapid and accurate response
  • Automatically temperature compensated
  • Medium temperatures and pressures
  • IC Controls factory certified calibration
  • Constructed of Hastelloy “C” and PVC with PVDF and TFE available for higher temperatures and pressures
  • Dual threaded design handles submersion, screw-in and flow through applications; all with one interchangeable sensor

 


Model Number Model Name Quantity
404 Model 404 General Purpose Conductivity Sensor  


1 1.0/cm sensor constant, 100 μS/cm to 10,000 μS/cm
2 2.0/cm sensor constant, 200 μS/cm to 20,000 μS/cm
71 Long sensor cable, maximum 30 m (100 ft), 100 ºC (212 ºF) max.
77 Quick connect fitting for model 450
89 Stainless steel tag
90 100 μS/cm standard, 500 mL bottle
91 1000 μS/cm standard, 500 mL bottle
92 10,000 μS/cm standard, 500 mL bottle
97 Conductivity calibration kit for cell constants 0.1/cm to 5.0/cm

 
Easy-Clean Conductivity Sensor

405
Easy-Clean Conductivity Sensor

Model 405: Easy-Clean Conductivity Sensor

For Reliable Conductivity Measurement
  • Sewers
  • Fouling environments
  • Tough problem areas
Features
  • Easy to clean and can be filed to renew surface
  • Easy to calibrate
  • Flat or open surfaces
  • Rapid and accurate response
  • Ambient temperature and pressure
  • Constructed of carbon, PVC and epoxy
  • Automatically temperature compensated
  • IC Controls factory-certified calibration
  • Dual threaded design allows use as submersion, screw-in or flow sensor

Model Number Model Name Quantity
405 Model 405 Easy-Clean Conductivity Sensor  


1 1.0/cm sensor constant, 100 μS/cm to 10,000 μS/cm
71 Long sensor cable, maximum 30 m (100 ft), 100 ºC (212 ºF) max.
77 Quick connect fitting for model 450
89 Stainless steel tag
90 100 μS/cm standard, 500 mL bottle
91 1000 μS/cm standard, 500 mL bottle
92 10,000 μS/cm standard, 500 mL bottle
97 Conductivity calibration kit for cell constants 0.1/cm to 5.0/cm

 
High-Conductivity Flow Sensor

406
High-Conductivity Flow Sensor

Model 406: High-Conductivity Flow Sensor

For Reliable Conductivity Measurement

  • 0 to 12% NaOH
  • 0 to 15% H2SO4
  • High conductivity solutions

Benefits

  • Industrial conductivity sensor
  • Low maintenance
  • Easy to calibrate
  • Rapid and accurate response
  • Automatically temperature compensated
  • IC CONTROLS factory-certified calibration
  • Constructed of carbon, PVC and epoxy
  • Direct insertion screw-in design, cell can be installed directly into end of 1¼" pipe, or in flow cell design use 1¼" NPT tee

Model Number Model Name Quantity
406 Model 406 High-Conductivity Flow Sensor  


20 20.0/cm sensor constant, 20,000 μS/cm to % acid/caustic with model 455
71 Long sensor cable, maximum 7.6 m (25 ft)
75 CPVC 1½ inch flow cell with 1 inch FNPT connections
89 Stainless steel tag
92 10,000 μS/cm standard, 500 mL bottle
93 100,000 μS/cm standard, 500 mL bottle
94 367,000 μS/cm standard, 500 mL bottle
97 High conductivity calibration kit for cell constants 10.0/cm to 50.0/cm

 
True-Union Conductivity Sensor

414
True-Union Conductivity Sensor

Model 414: True-Union Conductivity Sensor

The model 414 true-union conductivity sensor is a downsized version of the model 405, offered in an easy-to-install configuration for insertion or submersion applications. The true-union-style threaded fitting locks in the electrode for extra safety and very easy removal.

Recommended for applications where frequent removal in tough applications for calibration, cleaning or Q.C. checks is required.

For Universal Use

  • Submersion or insertion
  • Environmental monitoring
  • Process liquids

Benefits

  • One conductivity sensor handles submersion, screw-in, and flow-through, applications.
  • True union to lock in or remove easily
  • Rugged CPVC body construction
  • Easy to calibrate
  • Automatically temperature compensated
  • Low maintenance, easy to calibrate
  • Rapid and accurate response
  • Economical
Model Number Model Name Quantity
414 Model 414 True-Union Conductivity Sensor  


0.01 0.01/cm sensor constant, 0 μS/cm to 100 μS/cm
0.1 0.1/cm sensor constant, 10 μS/cm to 1,000 μS/cm
1 1.0/cm sensor constant, 100 μS/cm to 10,000 μS/cm
21 CPVC one piece flow cell/insertion fitting, 1 inch slip
23 316SS flow cell, 1 inch FNPT
24 CPVC flow cell, 1 inch FNPT
25 Slotted ½ inch NPT close-nipple for submersion mounting
26 CPVC quick connect insertion fitting, 1 inch MNPT, to 414 kPa (60 psi) at 90 ºC (194 ºF)
28 SS quick connect insertion fitting, 1 inch MNPT, to 689 kPa (100 ps) i at 150 ºC (302 ºF)
71 Long sensor cable, maximum 7.6 m (25 ft)
77 Quick connect fitting for model 450
89 Stainless steel tag
90 100 μS/cm standard, 500 mL bottle
91 1000 μS/cm standard, 500 mL bottle
92 10,000 μS/cm standard, 500 mL bottle
97 Conductivity calibration kit for cell constants 0.1/cm to 5.0/cm

 
Quick- Union Conductivity Sensor

425
Quick- Union Conductivity Sensor

Model 425: Quick- Union Conductivity Sensor

The model 425 quick-union conductivity sensor is a universal version offered in an easy-to-install configuration for insertion or submersion applications. The union-style threaded fitting locks in the electrode for extra safety and very easy removal.

Recommended for applications where frequent removal in tough applications for calibration, cleaning or Q.C. checks is required.

For Reliable Conductivity Measurement

  • Environmental monitoring
  • Medium-conductivity applications
  • Corrosive and chemical problems
  • Process liquids

Benefits

  • Only one conductivity sensor needed for all uses
  • Low maintenance
  • Easy to calibrate
  • Rapid and accurate response
  • Automatically temperature compensated
  • Medium temperatures and pressures
  • IC Controls factory-certified calibration
  • Constructed of Hastelloy "C" and CPVC with PVDF and TFE available
  • Quick-union design handles, submersion, screw-in and flow-through applications all with one interchangeable sensor
Model Number Model Name Quantity
425 Model 425 Quick- Union Conductivity Sensor  


1 1.0/cm sensor constant, 100 μS/cm to 10,000 μS/cm
2 2.0/cm sensor constant, 200 μS/cm to 20,000 μS/cm
69 CPVC flow cell and insertion fitting, 1½ inch slip
71 Long sensor cable, maximum 7.6 m (25 ft), 100 ºC (212 ºF) max.
73 CPVC flow cell, 1½ inch FNPT
75 316SS flow cell, 1½ inch FNPT
76 CPVC quick-connect insertion fitting, 1½ inch MNPT, to 414 kPa (60 psi) at 90 ºC (194 ºF)
77 Quick connect fitting for model 450
78 SS quick connect insertion fitting, 1½ inch MNPT, to 690 kPa (100 psi) at 150 ºC (302 ºF)
89 Stainless steel tag
90 100 μS/cm standard, 500 mL bottle
91 1000 μS/cm standard, 500 mL bottle
92 10,000 μS/cm standard, 500 mL bottle
97 Conductivity calibration kit for cell constants 0.1/cm to 5.0/cm

 
Conductivity Standards

cond-std
Conductivity Standards

Model cond-std: Conductivity Standards

Conductivity is one of the more neglected industrial measurements, frequently operating with large errors due to sensor coating and aging during use. Accurate calibration is difficult since there are special rinsing requirements at high and low conductivity levels, as well as variations in technical literature describing how to make up standard. IC Controls has produced the following standards, traceable to NIST, from the highest quality raw materials to help solve this problem.

Part No.
 Description
 Size
 6-pack Part No.
A1100161
 Conductivity standard 100 microsiemens/cm
 500 mL
 A1100161-6P
A1100162
 Conductivity standard 1,000 microsiemens/cm 500 mL A1100162-6P
A1100163 Conductivity standard 10,000 microsiemens/cm 500 mL A1100163-6P
A1100164 Conductivity standard 100,000 microsiemens/cm 500 mL A1100164-6P
A1100165 Conductivity standard 367,000 microsiemens/cm 500 mL A1100165-6P




A1100229
 ASTM D1125 reference solution A
111,342 microsiemens/cm
 500 mL
 A1100229-6P
A1100230
 ASTM D1125 reference solution B
12,856 microsiemens/cm		 500 mL A1100230-6P
A1100231
 ASTM D1125 reference solution C
1,408.8 microsiemens/cm		 500 mL A1100231-6P
A1100232
 ASTM D1125 reference solution D
146.93 microsiemens/cm		 500 mL A1100232-6P




A1100195 Conductivity standard 250 microsiemens/cm 500 mL A1100195-6P
A1100196 Conductivity standard 500 microsiemens/cm 500 mL A1100196-6P
A1100197 Conductivity standard 750 microsiemens/cm 500 mL A1100197-6P
A1100198 Conductivity standard 1.500 microsiemens/cm 500 mL A1100198-6P
A1100199 Conductivity standard 2,000 microsiemens/cm 500 mL A1100199-6P




A1100200 Conductivity standard 2,500 microsiemens/cm 500 mL A1100200-6P
A1100201 Conductivity standard 3,000 microsiemens/cm 500 mL A1100201-6P
A1100202 Conductivity standard 4,000 microsiemens/cm 500 mL A1100202-6P
A1100203 Conductivity standard 5,000 microsiemens/cm 500 mL A1100203-6P
A1100204 Conductivity standard 7,500 microsiemens/cm 500 mL A1100204-6P




A1100205 Conductivity standard 15,000 microsiemens/cm 500 mL A1100205-6P
A1100206 Conductivity standard 20,000 microsiemens/cm 500 mL A1100206-6P
A1100207 Conductivity standard 25,000 microsiemens/cm 500 mL A1100207-6P
A1100208 Conductivity standard 50,000 microsiemens/cm 500 mL A1100208-6P
A1100209 Conductivity standard 75,000 microsiemens/cm 500 mL A1100209-6P




A1100192 Deionized water
 500 mL A1100192-6P
A1900333
 Trace certificate. Records full calibration trail
to NIST SRM and their lot numbers.


About calibration...
When you buy from IC Controls, our commitment to you includes the standards to properly clean and calibrate the equipment. Our commitment to you does not stop when we ship the equipment, it continues until you have calibrated the analyzer system, and are satisfied with the results. To assist you in obtaining reliable results, IC Controls developed calibration and cleaning procedures and manufactures and packages the necessary standards, buffers, and supplies in convenient usage quantities. If you need assistance with calibration techniques or any other matter, our application development laboratory specialists are only a toll-free phone call away for advice and/or laboratory simulation of your problem. Buy from IC Controls because you get outstanding customer support as well as quality industrial equipment. In short, you get REAL SOLUTIONS.

 
conductivity calibration kits

cond-kit
conductivity calibration kits

Model cond-std: Conductivity Standards

Conductivity is one of the more neglected industrial measurements, frequently operating with large errors due to sensor coating and aging during use. Accurate calibration is difficult since there are special rinsing requirements at high and low conductivity levels, as well as variations in technical literature describing how to make up standard. IC Controls has produced the following standards, traceable to NIST, from the highest quality raw materials to help solve this problem.

Part No.
 Description
 Size
 6-pack Part No.
A1100161
 Conductivity standard 100 microsiemens/cm
 500 mL
 A1100161-6P
A1100162
 Conductivity standard 1,000 microsiemens/cm 500 mL A1100162-6P
A1100163 Conductivity standard 10,000 microsiemens/cm 500 mL A1100163-6P
A1100164 Conductivity standard 100,000 microsiemens/cm 500 mL A1100164-6P
A1100165 Conductivity standard 367,000 microsiemens/cm 500 mL A1100165-6P




A1100229
 ASTM D1125 reference solution A
111,342 microsiemens/cm
 500 mL
 A1100229-6P
A1100230
 ASTM D1125 reference solution B
12,856 microsiemens/cm		 500 mL A1100230-6P
A1100231
 ASTM D1125 reference solution C
1,408.8 microsiemens/cm		 500 mL A1100231-6P
A1100232
 ASTM D1125 reference solution D
146.93 microsiemens/cm		 500 mL A1100232-6P




A1100195 Conductivity standard 250 microsiemens/cm 500 mL A1100195-6P
A1100196 Conductivity standard 500 microsiemens/cm 500 mL A1100196-6P
A1100197 Conductivity standard 750 microsiemens/cm 500 mL A1100197-6P
A1100198 Conductivity standard 1.500 microsiemens/cm 500 mL A1100198-6P
A1100199 Conductivity standard 2,000 microsiemens/cm 500 mL A1100199-6P




A1100200 Conductivity standard 2,500 microsiemens/cm 500 mL A1100200-6P
A1100201 Conductivity standard 3,000 microsiemens/cm 500 mL A1100201-6P
A1100202 Conductivity standard 4,000 microsiemens/cm 500 mL A1100202-6P
A1100203 Conductivity standard 5,000 microsiemens/cm 500 mL A1100203-6P
A1100204 Conductivity standard 7,500 microsiemens/cm 500 mL A1100204-6P




A1100205 Conductivity standard 15,000 microsiemens/cm 500 mL A1100205-6P
A1100206 Conductivity standard 20,000 microsiemens/cm 500 mL A1100206-6P
A1100207 Conductivity standard 25,000 microsiemens/cm 500 mL A1100207-6P
A1100208 Conductivity standard 50,000 microsiemens/cm 500 mL A1100208-6P
A1100209 Conductivity standard 75,000 microsiemens/cm 500 mL A1100209-6P




A1100192 Deionized water
 500 mL A1100192-6P
A1900333
 Trace certificate. Records full calibration trail
to NIST SRM and their lot numbers.


About calibration...
When you buyequipments, our commitment to you includes the standards to properly clean and calibrate the equipment. Our commitment to you does not stop when we ship the equipment, it continues until you have calibrated the analyzer system, and are satisfied with the results. To assist you in obtaining reliable results, We developed calibration and cleaning procedures and manufactures and packages the necessary standards, buffers, and supplies in convenient usage quantities. If you need assistance with calibration techniques or any other matter, our application development laboratory specialists are only a toll-free phone call away for advice and/or laboratory simulation of your problem. Buy from IC Controls because you get outstanding customer support as well as quality industrial equipment. In short, you get REAL SOLUTIONS.