MAIN MENU
CATALOG INDEX
BY ALPHABETICAL
ORDER
For more info:
JSi@jsits.com
- [ Heavy Duty Hot
Wire
Thermo-Anemometer
]
- [ Heavy Duty
Thermo-
Anemometer ]
-
[ High Performance
Wind
Sensor ]
- [ Hygro-Thermometer
Anemometer/Data
Logger
]
- [ Kestrel
2000
Thermo-anemometer
]
- [ Kestrel
3000
Envirometer
]
- [ Pocket Wind Meter
]
- [ Portable
Wind
Measurement
]
- [ Rotating
Vane
Anemometer ]
- [ Turbo Meter ]
-
[ Turbo Meter
Electronic
Wind Speed
Indicator ]
- [ Wind
Alarm ]
- [
Wind
direction sensor
model
023 ]
- [ Wind
direction sensor
model
024A ]
-[
Wind
Sensor - Model
034
(speed&direction)
]
- [ Wind
speed sensor
model
013 ]
- [ Wind
speed sensor
model
014A ]
-
[ Wind Wizard
]
- [ Ultrasonic
Wind Sensor ]
The Model 023 Wind Direction Sensor is a rugged sensor that
accurately and reliably measures wind direction under the most adverse
environmental conditions.
Features
- Low starting threshold of 1.5 mph
- Unique "Mechanical Average System" reduces sensor wear
- Built in alignment and calibration fixture
- Operates in winds of 150 mph and ice loads of 2"
The Model 023 has been specifically designed for use in remote, unattented monitoring applications where the sensor is likely to encounter high winds and heavy icing conditions. The sensor has a starting threshold of 1.5 mph. Additionally, the sensor has built-in ice skirt which allows operation with up to a 2" ice load.
The two part wind vane is connected by a unique ±10° slotted shaft coupler to a precision wire wound potentiometer. The sensor output is an accurate MECHANICAL AVERAGE of the wind direction. An additional benefit of the slotted shaft coupler is decreased potentiometer wear and greatly increased sensor life. The Model 023 includes an orientation fixture which facilitates accurate field alignment.
Construction
The construction of the Model 023 Sensor reflects the requirement for reliability and durability. Only the best corrosion resistant materials, such as stainless steel or anodized aluminum are used. The Model 023 is used with a quick connect shielded sensor cable.
Specifications
- Electrical range: 0-360° (0-540° when used with 540° Translator Module)
- Threshold: 1.5 mph
- Maximum wind speed: 150 mph
- Accuracy: ±10° standard, other on request
- Ice load: 2 inches
- Delay distance: 15 feet
- Damping ratio: 0.3
- Potentiometer specifications
Sand, Dust, Fungus: MIL-E-5272
Salt Spray: MIL-E-12934
Resistance value: 10K ohms, others on request - Temperature range: -50° to 70°C
- Cable: #1805-xx (xx=length in feet)