CATALOG INDEX
BY ALPHABETICAL
ORDER

CATALOG INDEX
BY DEPARTMENT

For more inf o:
JSi@jsits.com

- [ DIC3 Portable Anemometer ]
- [ Heavy Duty Hot Wire
Thermo-Anemometer ]
- [ Heavy Duty Thermo-
Anemometer ]
- [ High Performance
Wind Sensor ]
- [ Hygro-Thermometer
Anemometer/Data
Logger ]
- [ Kestrel 2000
Thermo-anemometer ]
- [ Kestrel 3000
Envirometer ]
- [ Pocket Wind Meter ]
- [ Rotating Vane
Anemometer ]
- [ Turbo Meter ]
- [ Turbo Meter Electronic
Wind Speed Indicator ]
- [ Wind Alarm ]
- [ Wind direction sensor
model 023 ]
- [ Wind direction sensor
model 024A ]
-[ Wind Sensor - Model 034
(speed&direction) ]
- [ Wind speed sensor
model 013 ]
- [ Wind speed sensor
model 014A ]
- [ Wind Wizard ]
- [ Ultrasonic Wind Sensor ]

Our dual set point Wind Alarm provides both warning for and control of wind-sensitive equipment. Can be used to alert you to high or low wind speeds and can be factory calibrated in MPH, km/h or Knots.

To operate, set the thumb-wheel switches to your desired levels. When wind speed achieves or exceeds the first setting for 3 seconds, a yellow warning light illuminates and one internal SPDT relay activates. When wind speed achieves or exceeds the second setting for 3 seconds, a red light illuminates, a 90dB piezo buzzer sounds, and the second internal SPDT relay is activated.

This instrument is housed in a 6.3"(h) x 4.72"(w) x 3.29"(d) weathertight polycarbonate case and utilizes a non micro-processor circuit to minimize occurance of latch-up. It is accurate to +/- 2 MPH and operates on 12 volts DC, with an AC adaptor available as an option.

Shipped complete with sensor, cable, stub-mast and mounting hardware.

Specifications

• Range
  Indicator: 0-200 MPH, in 1 MPH increment
  Alarm: 0-99 MPH
• Accuracy: ±2 MPH of input and ±1 digit
• Sample Rate: 3 seconds
• Relay: SPDT relay (rated at 5A at 30 VDC)
• Dimensions: 6.3" height x 4.72" width x 3.29" depth
• Operating Temperature: 40°C - 120°F
• Power: 9-12 VDC (110 VAC optional)
• Current Draw: 300mA
• Sensor: 3-cup anemometer