MAIN MENU
CATALOG INDEX
BY ALPHABETICAL
ORDER
For more info:
JSi@jsits.com
- [ 4
& 3 Gas Monitors -
Low cost &
basic ]
- [
450
Photoionization
Detector ]
- [ AIM
000 Series and
250 Series Gas
Detectors
]
- [ AIM
600 Millennium
Compact Gas
Monitor ]
- [ AIM
915 series "stand
alone" gas detector ]
- [
CO Alarm
- residential ]
-
[ Pocket-size
Portable
Radiation Alert,
Monitor
]
- [ Gas
Data LMSxi
]
- [ Q-Check
CO2 and
CO Meter ]
- [ Shirtpocket Size
Ozone
Sensor ]
- [ Simple,
Inexpensive
Ozone Monitor ]
-
[ Single
Gas Portable
Monitors ]
- [ Testo 300 ]
- [
Testo 400
]
- [ Testo
450 ]
- [ TIF5GA
Automovite
exhaust gas
detector ]
- [ TIF8800A
Combus-
tible
Gas Detector ]
- [ VOC Gas
sensors ]
- [ VOC Monitor ]
-
[ Yes-205-5 Five
Channel IAQ Datalogger ]
| Model C-11 | Model C-21 | |
| Visual display only Lowest cost |
Includeds audio alarm, battery operation and provision for external alarm and data logger |
For paint
shops, printer, dry cleaners, wood workers, vehicule repair facilities,
chemical production areas and wherever indoor air quality monitoring is
required.
The Eco Sensors® Model C-11 and C-21 gas sensors help you comply with the new VOC air quality regulations for hydrocarbon gases and solvent vapors.
Benefits
- Constanly monitor your work environment. Detects leaks and poor air quality before they are a health hazard.
- No-installation. Easily used and understood by non-technical personnel.
- Virtually no maintenance.
Features
- Highly sensitive to solvent vapors and other VOCs. Bright green-yellow-red display clearly shows hazard level of gas or vapor. Model C-21 also features audio
- Detects down to OSHA, EPA, and other regulatory-mantated levels... typically at low ppm concentrations.
- Has built-in rechargeable battery for portable use in tracking leaks.
- Rugged construction with many safety features.
Specifications
- Response time: within one minute of gas reaching sensor.
- Size: 3 1/4" x 1 3/8" x 2 3/8 (85 x 35 x 60 mm)
- Weight: 5 oz. (140 grams)
- Battery life: over 15 minutes per charge Model C-11, and over 2 hours for Model C-21.
- Power requirements: 120v. AC, self-contained NiCad battery, or 12v. DC in vehicules.
- Measurement principle: semiconductor sensor.
| CAT. NO. | DESCRIPTION |
| ECC11-0000 | VOC Monitor with visual display only |
| ECC21-0000 | VOC Monitor with visual display and alarm |