MAIN MENU
CATALOG INDEX
BY ALPHABETICAL
ORDER
For more info:
JSi@jsits.com
- [ 4
& 3 Gas Monitors -
Low cost &
basic ]
- [
450
Photoionization
Detector ]
- [ AIM
000 Series and
250 Series Gas
Detectors
]
- [ AIM
600 Millennium
Compact Gas
Monitor ]
- [ AIM
915 series "stand
alone" gas detector ]
- [
CO Alarm
- residential ]
-
[ Pocket-size
Portable
Radiation Alert,
Monitor
]
- [ Gas
Data LMSxi
]
- [ Q-Check
CO2 and
CO Meter ]
- [ Shirtpocket Size
Ozone
Sensor ]
- [ Simple,
Inexpensive
Ozone Monitor ]
-
[ Single
Gas Portable
Monitors ]
- [ Testo 300 ]
- [
Testo 400
]
- [ Testo
450 ]
- [ TIF5GA
Automovite
exhaust gas
detector ]
- [ TIF8800A
Combus-
tible
Gas Detector ]
- [ VOC Gas
sensors ]
- [ VOC Monitor ]
-
[ Yes-205-5 Five
Channel IAQ Datalogger ]
Setting the standard in portable compact
- gas analysis instrumentation.
More features, such as,
- optional gas-leak probe
- CO Ambient Measurement
- large integrated memory
- location management option
The testo 300 offers more value than ever before for the
- boiler service technicians
- heating system installation technicians
Service: The savings continue after the instrument is purchased. Standard maintenance can be performed by the user. Smart replacement parts only need to be plugged in and they are ready to go. This means:
- less downtime
- lower cost
- greater flexibility to replace or upgrade in the field at any time
Applications
- Tuning of Boilers, Burners and Heaters
- Engine tuning
- Emission tests of CO and NO
- Differential Temperature measurements
- Ambient CO detection
- and more...
Advantages of testo 300 M:
- User friendly operation via large display and rubber keyboard with exact action point
- Freely assignable function buttons gives you total control on the instrument functions
- Differential pressure measurement makes filter evaluation and maintainance easy
- Internal memory for 20 complete measurements
- Data transfer to PC (RS 232) with Testo software
- Cordless printout on a standard infrared printer for easy on-site documentation
- Fast measured values for evaluating and adjusting timed and modulating burners with a short combustion improves accuracy
- Available with NO(x) measurement or can be upgraded at any time
- Save time and money by changing the measuring cells and rechargeable battery yourself with no tools requiered
- Battery operation with approx. 5 hours operating time for a full days sampling
- Quick battery recharging
Additional advantages of testo 300 XL:
- Cordless printout on attachable Comfort printer
- More memory space for the values measured in up to 100
systems
Option: Memory space up to 400 systems - Measurement of CO in ambient air via CO probe
- Checks for leaks in gas pipes using the gas leak detection probe
- CO switch-off function if concentrations are too high
- Differential temperature measurement to adjust condensing burners and to measure flow and return temperatures
- Measured value can be quickly allocated to the measuring location using the barcode pen for accurate documentation and control
Technical data
testo 300
M and 300 XL
| Temperature measurement | |
| Temperature Sensor |
-40 to +1200°C(-40 to 2190°F) Typ K thermocouple (NiCR-NI) to DIN IEC 584, Part 2, Class 1 |
| Accuracy | ± 0.5°C/1°F (0 to +99.9°C /32 to 210°F)) ± 0.5 % of m.v. (from +100°C/212°F)) |
| Resolution | 0.1°C / 1°C / 0.2/1.8°F (from +1000°C/1830°F) |
| Draft / pressure
measurement D p measurement | |
| Meas. range | ± 80 mbar (± 32 " H2O) |
| Resolution | 0.01 mbar (0.01 " H2O) |
| Accuracy | ± 0.03 mbar (±0.01 " H2O) |
| max. overload | 1 bar (400 " H2O) |
| Gross/Net Efficiency (Eta) | |
| Meas. range | 0 to 120 % |
| Resolution | 0.1 % |
| O2 measurement | |
| Meas. range | 0 to 21 vol. % |
| Accuracy | ± 0.2 vol. % absolute |
| Resolution | 0.1 vol. % |
| Response time t90 | Approx 40 s |
| CO2 measurement | |
| Display range | 0 to CO 2 max |
| Accuracy | ± 0.2 vol. % |
| Resolution | 0.01 vol. % |
| Measurement | digital calculation from O2 |
| Response time t90 | Approx 40 s |
| CO measurement (with H2 compensation) | |
| Meas. range | 0 to 8000 ppm |
| Accuracy | ± 20ppm (to 400ppm) ± 5% of m.v. (to 2000ppm) ± 10% of m.v.(to 8000ppm) |
| Resolution | 1 ppm |
| Response time t90 | Approx. 60 s |
| NO measurement | |
| Meas. range | 0 to 3000 ppm |
| Accuracy | ± 5ppm (to 100ppm) ± 5% of m.v. (to 2000ppm) ± 10% of m.v.(to 3000ppm) |
| Resolution | 1 ppm |
| Response time t90 | Approx. 60 s |
| Additional measuring ranges in testo 300 XL | |
| Ambient CO measurement (with CO probe) | |
| Meas. range | 0 to 500 ppm |
| Accuracy | ± 5ppm (to 100ppm) ± 5% of m.v. (< 100ppm) |
| Resolution | ± 1 ppm |
| Response time t90 | Approx. 35 s |
| Gas leak meas. for combustible gases
(with gas leak detection probe) | |
| 1 st alarm limit | 200 ppm CH 4 |
| 2 st alarm limit | 10,000 ppm CH 4 |
| Optical display (LED) for 1 st and 2 nd
alarm limit acoustic display via buzzer | |
| Response time t90 | > 2 sec. |
| General technical data for testo 300 | |
| Weight: | 700 g |
| Dimensions: | 250x85x65 mm (lxwxh) |
| Transport/storage temp.: | -20 to +60°C (-4 to 140°F) |
| Ambient temp.: | +4 to +45°C (39,20 to 113°F) |
| Display: | Graphics display 128 x 100 pixels |
| Power supply: | Via plug mains unit, batteries or exchangeable rechargeable batteries |
| Technical data for printer | |
| Standard infrared printer | |
| Printer type: | Infrared thermal printer |
| Receiving radius: | max. 2 m |
| Dimensions: | 186 x 91 x 61 mm |
| Weight: | 430 g (incl. batteries) |
| Operating temp.: | 0 to +50°C (32 to 122°F) |
| Storage temp.: | -40 to +60°C (-40 to 140°F) |
| Power supply: | 4 round cell 1.5 V batteries or NC rechargeable batteries |
| Comfort printer (only for testo 300 XL) | |
| Printer type: | Infrared thermal printer, can be attached to testo 300 XL |
| Receiving radius: | max. 2 m |
| Dimensions: | 115 x 78 x 78 mm |
| Weight: | 290 g (incl. batteries) |
| Operating temp.: | 0 to +45°C (32 to 113°F) |
| Storage temp.: | -20 to +60°C (-4 to 140°F) |
| Power supply: | 4 round cell 1.5 V batteries or NC rechargeable batteries |
| Other features: | - Printout of company logo - autom. data check via bidirectional interface - Quick data transfer on account of buffer memory (70 cm text in 90 s) |
| Warranty | |
| Instruments | 2 years (except working parts, measuring cells) |
| CO/NO meas. cell | 1 year |
| O2 meas. cell | 1 1/2 years |
| Probes | 1 year (not including filters) |
| Rechargeable batteries | 1 year |
| Accessoires | 6 months |
| Printer | 1 year (except printing mechanism) |
| CAT. NO. | DESCRIPTION |
| TE300M-000......... | Testo 300M flue gas analyzer to measure
O2, CO2, CO (H2
compensated), effg/effn, draft/pressure, delta
P, °F. Power supply/charger, 110V Compact flue gas probe, 12" long, with 7ft hose patented condensate trap and particle filter Ambient air temperature probe, 4" long Standard printer, infrared printer for wireless printout of measured values, 4 batteries and 1 roll thermal paper Instrument case dust and impact protection for instr., carrier strap and magnetic back (not shown) Transport case for meas. intr., probes and accessories. |
| TE3000XL-000...... | Testo 300XL flue gas analyzer to measure
O2, CO2, CO (H2 compensated), CO (ambient), flue gas, effg/effn,
draft/pressure, delta P, CH4, °F, delta T. Power supply/charger, 110V Compact flue gas probe, 12" long, with 7ft hose patented condensate trap and particle filter Ambient air temperature probe, 12" long Attachable printer for wireless printout of measured values, 4 batteries and 1 roll thermal paper Instrument case dust and impact protection for instr., carrier strap and magnetic back (not shown) Transport case for meas. intr., probes and accessories. |