CATALOG INDEX
BY ALPHABETICAL
ORDER

CATALOG INDEX
BY DEPARTMENT

For more info:
JSi@jsits.com

- [ Data Logger &
Software Packages ]
- [ Display STARLOGGER
Model 6004-2 ]
- [ Hygro-Thermometer
Anemometer/Data Logger ]
- [ MACRO Data Logger
Model 7000 ]
- [ MACRO Tester model
7805A ]
- [ Memory Card
STARLOGGER
Model 6004-3 ]
- [ RF Remote Site
Monitoring Products ]
- [ Rugged MS-DOS 5.0 Hand-Held PC ]
- [ Standard STARLOGGER
Model 6004-1 ]
- [ Unidata 7001
Prologger ]
- [ ZENO®-3200
Datalogger ]

The Standard STARLOGGER is the first in a familly of data loggers designed to meet your exacting requirements by offering not only an extended signal capacity and range but also easier programmability.

The latest development in this range of dataloggers, the STARLOGGERs offer 12 input channels, two high speed serial input/output busses and two outputs. They also provide two power sources for external instruments.. The range of scan rates extends from 125 milliseconds to 5 minutes.

Designed for trouble-free operation in a wide range of data logging applications, the STARLOGGER is upwardly compatible with the STARLOG Portable Data Logger. It readily replaces a PDL and also offers increased performance.

All STARLOGGERs feature eight (10 bit) analog channels, four (16 bit) counter/frequency channels, and sisten (16 bit) STARBUS serial I/O channels. Memory is a large 128K capacity CMOS RAM, enough storage for many mounths of recording. STARLOGGERs are completely portable, containing an internal battery supply for one year of normal operation. Like all UNIDATA loggers, it is fully programmable using the STARLOG programming language.

The STARLOGGER communicates using standard asynchronous RS-232 serial communication standards which allow it to communicate with an IBM PC or compatible computer using a standard cable.

STARLOGGER Specifications

• Analog Input : 8 channel, 10-bit resolution, single ended, unipolar, plus temperature and battery voltage. Voltage input in two ranges, programmable : 0 to 2.550 volts, 2.5 mV resolution, 0 to 255 mV, 250 µV resolution
• Input Impedance : >1M ohms
• Load Impedance : For signals <500 mV: >1M ohm For signals <500mV : 10 Kohms
• Source Drive Impedance : <10 Kohms
• Counter Input : 4 channel, 16-bit resolution, 20kHz, potential free or 5-12V pulse
• STARBUS : 2 high speed serial lines with 8 channels each, 16-bit, bi-directional, synchronous data & clock
• SDI-12 : 1200 bps, instrument channel (Models 6004-2 and 6004-3 only)
• Controls : 1 open collector, 1 CMOS
• Available Voltages : 5 V, 100mA regulated scan synchronised; 1mA unregulated continuous
• Scan Rate : 0.125 second to 5 minutes, programmable
• Log Interval : 0.125 second to 1 week, programmable
• Storage Memory : 128 K bytes CMOS RAM
• Time Clock : Crystal regulated, ±10 seconds per month
• Battery : 10Ah Alkaline pack (Rechargeable NiCard available)
• Memory Back-up : 1/2 AA 3.4 V Litium (optional)
• Processor : 8 bit, 80C31 micro controller, 14.7456 MHz
• Computer I/O : RS-232, 300-38400 bps
• Operating Temperature : -20°C to 60°C, not affected by humidity
• Enclosure : High impact PVC, IP54
• Size/Weight : 211mm x 108mm x 81mm, 800g (excl. battery)
• Display : 32 ASCII character LCD (Models 6004-2 and 6004-3)