| |
 |
Hotplates and Stirrers
for Laboratories |
|
|
|
Stirring,
heating and controlling using the SLR
|
 |
SLR
|
Using our new laboratory stirrer with
heating,
the process of mixing liquids can be selected from careful to
intense, and the device can be also be used for speedy heating
up or controlled temperature adaptation.
All functions can be viewed and monitored on the large, clear
LCD display.
The stirrer speed range from 100 to 1000/min and can be set
in steps of 10/min.
The heating power can be set in 24 steps and reaches an average
heating output of 0.9 kW at step 24.
The display will inform the user at intervals of 5 s about the
actual andthe set temperature.
|
|
SLR |
| Heating
power (kW) |
0.9 |
| Max hot Plate Temp |
550 C |
| Heated
zone (mm) |
D=155 |
| Min.
time to boiling point of 1l water* (min) |
approx.
15 |
| Hot
plate material |
glass
ceramic |
| Hot
plates area (mm) |
235
x 235 |
| Temperature-sensor
connector(Option) |
yes,
Pt 1000 |
| Setting
accuracy with temperature sensor (C) |
1 |
| Digital
set/actual temperature display |
yes |
| Max.
rpm |
100
- 1100 |
| Setting
accuracy rpm |
10 |
| Max.
stirring volume (l water) |
20 |
| Digital
set/actual rpm display |
yes |
| Dimensions
(LxWxH) in mm |
370
x 240 x 85 |
| Order
No. 230V |
28
541 6373 |
| Order
No. 115V *** |
28
541 6279 |
PID available
|
* Measured
in 3l glass beaker at 25C ambient temperature and 1bar air pressure
** Depending on liquid quantity, heat capacity, and ambient
temperature
재성ITS :tel:031-479-4211 |
|
|
|
