Simple, Inexpensive Ozone Monitor

Simple, Inexpensive Ozone Monitor

For water treatment plants, pulp bleaching mills, ozone generator monitors, photocopier and laser printer centers, fumigation projects, HVAC and indoor air quality systems, vehicular pollution monitors, research labs and pilot plants, and wherever ozone exposure is possible.

The C-30Z has very fast and continuous response. It is rugged and versatile. There are no touchy controls.

Benefits :

Constantly monitors your work environment. Shows the situation by a multicolor graphical display, and alarms when there is a health hazard.
No installation typically required. Easily understood by non-technical personnel.
Virtually no maintenance.

Features :

LED readout changes color as ozone level increases.
Audio alarm and output for data logger.
Connections for external equipment control.
For general monitoring and for ozonator control.

Specifications :

Range : .01-.14 ppm of ozone (LED scale); .01-2 + ppm via external data readout.
Bargraph Display : Normally green. Yellow at .05 ppm (caution). Red at .1 ppm danger.
Response time : within a few seconds of ozone reaching the sensor.
Measurement principle : HMOS (heated metal oxide semiconductor) sensor.
Size : 3 1/4" x 1 3/8" x 2 3/8" (85 x 35 x 60 mm)
Weight : 5 oz. (140 grams)
Power requirements : 120 volts AC 60 Hz or 12 volts DC at 400 ma.
Outputs : LED bargraph, audio alarm, 0-2 + analog voltage output such as for data loggers, and external alarm relay contacts. Alarm actuation and relay contact closure at .1 ppm.

CAT. NO.	DESCRIPTION
ECCC30Z-000..........	Ozone monitor and generator controller. Has audible alarm, accessory jack to external data logger and external alarms.