MACRO Data Logger Model 7000

MAIN MENU

- [ Data Logger &
Software Packages ]
- [ Display STARLOGGER
Model 6004-2 ]
- [ Hygro-Thermometer
Anemometer/Data Logger ]
- [ MACRO Data Logger
Model 7000 ]
- [ MACRO Tester model
7805A ]
- [ Memory Card
STARLOGGER
Model 6004-3 ]
- [ RF Remote Site
Monitoring Products ]
- [ Rugged MS-DOS 5.0 Hand-Held PC ]
- [ Standard STARLOGGER
Model 6004-1 ]
- [ Unidata 7001
Prologger ]
- [ ZENO®-3200
Datalogger ]

MACRO Data Logger Model 7000

This an upward compatible development of the Model 6003 Portable Data Logger.

In the STARLOG range of Data Loggers, it offers more channels, better accuracy, accepts a wider range of signals has a programmable power supply.

MACRO Data Logger Features

Expanded signal capacity and range for analog channels (16 channels, 20 bit dynamic range, 12 bit resolution)
Wide input ranges (±10.00 mV to ±5.000 V fullscale)
Four high resolution counters (16 bit)
Extended scan rates (from 125 milliseconds to 5 minutes)
User programmable power source (+10 V, ±2 VDC 250mA)

All setting up and adjustments associated with range changing and calibration are performed by firmware. There are no user adjustments or switches to be set. The MACRO Data Logger is fully programmable from the STARLOG Software Package.

As the most advanced STARLOG Data Logger it easily handles a wide range of precision instruments. The expanded dynamic range of the MACRO Data Logger enables the connection of instruments such as thermocouples, PT100s, pyranometers, strain gauge pressure transducers, precision thermistors and frequency derived signals without amplifier modules or signal conditioning circuitry.

The MACRO Data Logger incorporates the latest advanced CMOS technology and intelligent auto calibration techniques to provide a very accurate low cost programmable data collection system.

MACRO Data Logger Specifications

Analog Inputs : 16 channels, 12 bit resolution + sign, Biopolar, 8 Differenttial or 16 single ended. Voltage input in four ranges, programmable
Accuracy : 0.1% (0.2% on 10mV range)
Input impedance : (logger active): >1mohm
Load impedance for signals <500 mV : >1Mohm
(logger inactive) : for signals >500 mV : 10kohms
Source drive impedance : <10 kohms recommended
Counter Inputs : 4 channels, 16 bit, 20kHz, suitable for potential free contacts and 5-12 VDC digital signal.
High Speed Serial : 2 inputs, bi-directional, synchronous, max. of 5 channels on both inputs
Output Pulse : 2 channels, open collector 30 V, 100mA programmable pulse width (5 µs to 250 ms)
Instrument Power : max. 350 mA in pulsed mode; max. 175mA continuous mode
Instrument Voltages :
5VDC, 100mA, regulated (scan synchronised)
10VDC, 100mA, regulated, programmable duty cycle (PDC)
12VDC, 200mA, unregulated, PDC
-12VDC, 50mA, unregulated, PDC
max. 250 mA load on PDC supplies
Scan Rate : 0.125 second to 300 seconds, programmable
Log Interval : 0.125 second to 168 hours, programmable
Time Clock : Crystal regulated, ±10 seconds per month
Storage Memory :Low power 128K CMOS
Buffers : up to 8, linear or circular
Processor : 8 bit 80C31 micro controller, 14.7456 MHz
Computer I/O : Serial, full duplex, RS-232C, 8 Data plus Stop bit, Data rates: 300/1200/2400/4800/9600/19200/38400/76800
Operating Temperature : -20°C to 60°C
Enclosure : High impact PVC, IP 54
Size/Weight : 211mm Hx 108mm W x 81mm D, 800 grams (excluding battery pack)

CAT. NO.	DESCRIPTION
UN7000-210........ UN7004-230........ UN7000B-00.......	7000B MACRO Data Logger with 128K and 7900B Alkaline Battery Pack 7000B MACRO Data Logger with 128K and 7900D NiCad Battery Pack MACRO Data Logger unit with 128K - no battery