CATALOG INDEX
BY ALPHABETICAL
ORDER

CATALOG INDEX
BY DEPARTMENT

For more info:
JSi@jsits.com

- [ Calibration Kit ]
- [ Concrete Moisture
Meter ]
- [ DEC Scanner -- Roof
moisture detector ]
- [ Leak Seeker ]
- [ Non-destructive
moisture detector for
boats ]
- [ Digital psychrometer ]
- [ Digital Wood Moisture
Meter ]
- [ Moisture Encounter ]
-[ Moisture System
Model MMS ]
- [ Paper Moisture Tester ]
- [ Temperature Humidity
TH8 ]
- [ Wet wall detector ]
- [ Wood Moisture Meter ]

For measuring moisture content instantly in concrete floors and sand: cement screeds without the need to drill or damage the surface

Features

• Instant Readings
• Non-destructive in operation
• No need to probe or drill or mechanically damage the surface
• Reproductable results
• Battery Operated
• Pocket Sized

The Concrete Encounter is a hand-held electronic moisture meter operating on the principle of non-destructive impedance measurement. Parallel co-planer electrodes are mounted on the base which, during operation, transmit low-frequency signals into the concrete or sand:cement floor screed to a depth of appox. 12.5mm (½ inch). The results are formulated to give the average moisture content to a depth of approximately 100mm during the drying period.

While concrete under normal conditions can never be completely dry, the instrument has been calibrated on acceptably dry material. In operation it compares the change in impedence caused by the presence of dampness and displays this on a clear, easy to read, analog dial.

Specifications

• Size : 150mm x 75mm x 33mm
  6" x 3" x 1.3"
• Weight : 298g (10.5 oz)
• Construction : Extruded Aliminum
• Power : 9 volt PP3 batteries
• Display : Analogue
• Measuring Range : 1-7% H2O