MAIN MENU
CATALOG INDEX
BY ALPHABETICAL
ORDER
For more info:
JSi@jsits.com
- [ AXSYS
Datalogger ]
- [ Levelogger
Series ]
- [ Pressure
Transducers:
SDI
Depth Sensor ]
- [ Pressure
Transducers:
Submersible
Depth Transmitter II ]
- [ Type
A-71 Chart
Recorder
]
- [ Type F
Water Level
Recorder
]
- [ Unidata
6541 Precision
Water Level
instrument
]
- [ Water Level
Meter ]
AXSYS DATALOGGER
The
Stevens AxSys System is a microprocessor-based, low power instrument used
for various applications involved in water and wastewater monitoring,
recording and controlling. The unit is designed to accept a variety of
signal inputs for such variables as water level, flow, temperature, or
other similar parameter. It offers a large memory capacity in a removable
Stevens Data Card, which can be brought in from the field and read into a
computer in the office. Additional onboard, non-volatile memory is also
available for applications where the Data Card is not needed, or the
security of redundant data storage is desirable. The sensor interface is
configurable to suit the particular application involved. Single parameter
analog or digital sensing is possible for monitoring water level,
temperature or flow. Multi-parameter sensing is possible using serial
interface capability, either RS-232 or SDI-12. Two opto-isolated output
signals are optional, available for alarms, chemical pacing or triggering
samplers. Various hardware and operational firmware configurations provide
the instrument the versatility to be applied in a wide variety of water
and wastewater management applications. The simplicity of the keypad and
display make set up and operation easy to understand for users at all
levels of experience. Basic instrument operation is consistent from
application to application, so there is no longer the need to learn how to
operate many different types of instruments.
The instrument has a built-in keypad and display, which facilitates programming in the field without the need for a computer or other programming device. A simple, self-prompting menu leads the user through various programming options, allowing for quick and easy set up and configuration of the unit and applicable sensor.
The instrument is also equipped with a standard RS-232 serial communications port, allowing for transfer of data to a computer or other processing device, as well as access to all programming features remotely, through use of standard telecommunications schemes.
Data can be recorded based on conditions appropriate to the application. Standard linear and threshold triggered recording methods are available. The user can easily access the features desirable to his or her application.
Specifications
| Power Requirements | 10-17 VDC, <5 mA standby current |
| Size | 5.3 x 6.7 x 5.15 inches (134 x 170 x130 mm) |
| Weight | Less than 3 lbs. |
| Number of Inputs | Single input, analog , digital or serial (multi-drop) |
| Keypad & Display | 2x20 character alpha-numeric display, 4 key integral touch keypad |
| Recording Intervals | 1 , 5, 6, 10, 15, 30 seconds, 1, 5, 6, 10, 15, 30 minutes, 1, 2, 4, 6, 8, 12, 24 hours |
| Real-time Clock | Accuracy +/- 3 minutes/month, leap year correction |
| Non-volatile Memory | All setup parameters and clock, internal lithium battery |
| Serial Port | RS-232, minimum +/- 5VDC levels, 300 to 9600 baud |
| Environment | -40 to +70 degrees Celsius, to 100% humidity condensing in NEMA 4 configuration |
| On-Board Data Storage | FLASH EPROM, 128K Bytes, Capable of storing 60,000 readings |
| Data Card | FLASH EPROM, PCMCIA, 256K Bytes, capable of storing 120,000 readings |
Sensor interface capabilities
| Digital | |
| Number of Sensors | One |
| Sensor Type | Bi-directional pulse count or digital quadrature |
| Sensor Power | 5 or 12 VDC continuous, or 5 VDC auto-switched for quadrature encoder |
| Maximum Rate | 500 pulses per second |
| Analog | |
| Number of Sensors | One |
| Input Type | 2 wire, 4-20 mA current loop |
| Sensor Power | 24VDC, under firmware control |
| Accuracy & Resolution | .25% accuracy, .1% resolution |
| Serial | |
| Number of Sensors | Up to 8 |
| Input Type | RS232 or SDI-12 |
| Sensor Power | 12 VDC continuous, 5 or 12 VDC under firmware control (switched) |
| Accuracy & Resolution | Sensor dependent |
Features:
- Instrument for water and wastewater monitoring, recording & controlling
- Built-in keypad and 2-line alpha-numeric display
- Data stored internally or on removable PCMCIA FLASH data card
- Fully portable, NEMA4 enclosure
- RS-232 port standard for computer access
- Industry-standard digital, analog, and serial (RS-232, SDI-12) sensor interfaces available